What to Do Before Installing a Heat Meter
Before installation, a heat meter suitable for the apartment must be selected.
All tests of the installation must be completed and the system must be flushed before the meter is installed.
The heat meter must not be installed dry; it must only be installed after a leak test has been carried out.
So that the heat meter can easily be removed or replaced at the end of its service life, one shut-off valve must be installed in front of it and one behind it.
To prevent dirt and deposits that may build up in the heating water from affecting measuring accuracy, a strainer must always be installed in front of the lower body of the heat meter. After the system has been flushed, the strainer’s filter must be cleaned.
Make sure the arrow on the lower body matches the flow direction of the line.